12 Core MPO To 6 Duplex LC OM4 MMF Cable

12 Core MPO To 6 Duplex LC OM4 MMF Cable
Details:
Telecom MPO fiber optic patch cord is a fiber optic cable with high return loss and low insertion loss. MPO cable can be made as simplex, duplex, bundle, ribbon, multi-fiber. MPO cable fiber optic patch cord can be black, blue, red, auqa, biege ect colors and fast delivery fiber optic patch cord.
This 12 Core MPO To 6 Duplex LC OM4 MMF Cable usually is Magenta, if you need other color, HTF can do customized accordingly.
Send Inquiry
Description
Send Inquiry

12 Core MPO To 6 Duplex LC OM4 MMF Cable mainly used to branch 12 core MPO connector of MPO trunk optical cable terminal into single core or double core conventional connector. One side is a 12Core MPO connector, and the other side is 12 LC connectors. 

It is used in datacenter, transceiver to transceiver connect, short distance transmission. 


Features:

Low insertion loss, high return loss

MT based Multi-fiber Connector, 4, 8,12 and 24 fiber connector terminations and assemblies

Economical solution for mass-termination of fiber

Designed for low loss and standard loss SM and MM applications

Ruggedized round cable, oval cable and bare ribbon options available

Color coded housings available to differentiate fiber type, polish type and/or connector grade

Good in repeatability and exchangeability


Availability:

Ribbon and bundle cable available;

Patch cord, pigtail cable assemblies available.

MPO Loopback available


0.35db ultra low IL connector

Up to 0.35db, usually less than 0.15dB on mm low loss inserts and MPO connectors

High quality multimode fiber

High quality multimode fiber is designed to withstand small bending and challenging routing, and its signal loss is much less than that of traditional multimode fiber.

Low smoke zero halogen rating

When exposed to high heat sources, the mixture emits a small amount of smoke and is halogen-free.

The LSZH cable is designed and tested in accordance with iec-60332-1 and iec-61034.

7.5mm minimum bending radius

Our cables are designed to improve bending performance in reduced radius applications such as residential or office environments with small bending radii.

mpo patch cord Female

Connector A

MPO Female (pinless)

Connector B

LC UPC Duplex

Fiber Mode

OM4 (OM3) 50/125μm

Wavelength

850/1300nm

MPO Connector IL

0.35dB Max (0.15dB Typ.)

LC Connector IL

≤0.2dB

MPO Connector RL

≥20dB

LC Connector RL

≥20dB

Attenuation at 850nm

≤2.3dB/km

Attenuation at 1300nm

≤0.6dB/km

Jacket OD

3.0mm

Fan-Out Diameter

2.0mm

Installation Tensile Load

100 N

Long-Term Tensile Load

50 N

Cable Jacket

LSZH

Fiber Count

8 Fibers

Operating Temperature

-10°C to +70°C

Storage Temperature

-40°C to +85°C



Range of   Mode

Single   mode or Multi mode

Cable   Type

Simplex,   Duplex

Connector   Style

SC, FC,   ST, LC, MTRJ, E2000, MU, MPO /MTP etc.

Polish   or Ferrule Interface Type

PC, UPC,   APC

Cable   Diameter

0.9mm,   1.2mm, 1.6mm, 1.8mm,2.0mm, 3.0mm

Outer   Jacket

PVC   /LSZH/OFNP

Jacket   Color

SM   Yellow | OM1, OM2 Orange | OM3 Aqua | OM4 Aqua or Violet | OM5 Lemon Green

Durability

500   cycles(0.2 dB max increase). 1000mate/de mate cycles

Operating   Temp.

-20 ℃ to +70℃/+85℃ (armored)

Storage   Temp.

-40℃ to +85℃



Optical Performance Data

 

                      Item

Single   modeMultimode
PC

UPC

APC

62.5/125

50/125   OM1/2

50/125   OM3/4/5

                   Insert  Loss

 

0.2dB   Max. (0.15dB Elite)

 

0.2dB   Max. (0.15dB Elite)

                  Return Loss

≥50 dB

≥55 dB

≥60 dB

≥35 dB

 

        Insert. Loss/MTP or MPO

0.7dB   Max. (0.35 dB Elite.)

0.5dB   Max. (0.35dB Elite.)

      Return Loss s/MTP or MPO

≥50dB

≥55 dB

≥60 dB

≥20dB

 

                  Pull strength

≥68N

≥68N

≥68N

≥68N

 


The module output can be directly connected to the system equipment output port, panel port or user terminal by using single core or dual core jumper. The feature of the transfer module is that the single core or dual core port is at the front end of the module, 12 port SC simplex connector and 12 port LC duplex connector can be selected, and one or two adapters are installed on the back. The module is a patch cord that directly connects the front panel of the module to the back adapter. MPO to LC8 core branch optical cable is mainly used to connect 40gqsfp optical module with 10gsfp optical module, transmit and receive 4-channel array at MPO end, respectively connect optical interface of SFP module according to channel sequence, LC end has pre-determined function of fiber channel, positioning with duplex clip, users only need to plug and pull out connection easily. 8-core mpo-mpo optical fiber patch cord, using parallel 4tx and 4rx channels, meets the qsfpsr44 * 10gbs interface standard, and is used for 40Gb (qsfp) equipment transmission connection.


Low insertion loss LC connector

Imported high-quality ceramic plugs are used to reduce transmission loss and enhance transmission stability.


Application of 8-core structure

8-core joint parallel processing applications, using 12-core joints, hollow 4-core.


Optical Fiber Polarity: 

A typical optical link requires two optical fibers to complete the entire transmission process. For example, the optical module includes the receiving end and the transmitting end

The receiving and transmitting ends must be ensured to be interconnected, and the matching of the sending end (TX) to the receiving end (Rx) at both ends of a fiber optic link is called polarity.

For pre-terminated, high-density cabling systems, such as MPO/MTP connections, polarity issues must be addressed.


Deliver, Shipping and Serving 

Excellent after-sale service;

Samples are available for testing;

Reply your inquiry within 24 hours;




FAQ

Q: Is it om3 or OM4

A: It's  om4.

Q: What size conduit is required for this cable?

A: Indoor use only, you could get away it but you should use outdoor grade .

Q: What is the minimum length for MTP/MPO trunk and breakout cables? 

A: The minimum length is 0.3m .  

Q: What kind of polarity should I choose if I want to connect 2 transceivers by the trunk cable? 

A: 12 fibers type B cables for QSFP28 modules and 24 fibers type A cables for CFP modules. 

Q: What's the difference between MTP and MPO connector? 

A: MTP is a kind of high performance MPO connector with multiple innovative design. Compared with the general MPO connector, the MTP optical fiber connector has been strengthened in the optical and mechanical properties. 


 

Hot Tags: 12 Core MPO To 6 Duplex LC OM4 MMF Cable, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, mpo 12 100g, mpo 12 connector type, MPO Female to MPO Female connector, MTP MPO Female OM3 Cable, MPO Fiber Cables For 40G, MPO 12 Fibers OM4 Cable

Send Inquiry