General Description
Model type | SFP-1.25G | Brand | HTFuture |
Encapsulation | SFP | Data Rate | 1250Mb/s |
Wavelength | 1310nm | Reach | 2KM |
Interface | Duplex LC | LD | FP |
Cable Type | SMF | DDM Support | Yes |
Tx power | -9~-3dBm | Rx Sens | <-19dBm |
Temperature | 0~70°C (32~158°F) | Quality guarantee | 3 years |
Applications
● Switch to Switch Interface
● Gigabit Ethernet
● Switched Backplane Applications
● Router/Server Interface
● Other Optical Links
Part Number Ordering Information
Part Number | Data Rate (Gb/s) | Wavelength (nm) | Transmission Distance(km) | Temperature (°C) (Operating Case) |
HTSF-M1G31FC | 1.25 | 1310 | 2km SMF | 0~70 commercial |
HTSF-M1G31FE | 1.25 | 1310 | 2km SMF | -10~80 Extended |
HTSF-M1G31FI | 1.25 | 1310 | 2km SMF | -40~85 Industrial |
SFP Types
SFP transceivers are available with a variety of transmitter and receiver specifications, allowing users to select the appropriate transceiver for each link to provide the required optical reach over the available optical fiber type (e.g. multi-mode fiber or single-mode fiber). Transceivers are also designated by their transmission speed. SFP modules are commonly available in several different categories.
1. 1Gbit/s multi-mode fiber, LC connector, with black or beige extraction lever. SX – 850 nm, for a maximum of 550 m at 1.25Gbit/s (gigabit Ethernet). Other multi-mode SFP applications support even higher rates at shorter distances.
2. 1.25Gbit/s multi-mode fiber, LC connector, extraction lever colors not standardized. SX+/MX/LSX (name dependent on manufacturer) – 1310 nm, for a distance up to 2km. Not compatible with SX or 100BASE-FX. Based on LX but engineered to work with a multi-mode fiber using a standard multi-mode patch cable rather than a mode-conditioning cable commonly used to adapt LX to multi-mode.
Mechanical Dimensions
FAQ
1. Question: Is it a replacement part for a Gigamon fclf-8520-3-gm?
Answer: No, it isn’t. According to our experience, Finisar switch do not have special requirements for coding.
2. Question: Does the 1000base-t unit have faster through-put vs. the 10/100/1000base-t unit?
Answer: No, the difference between 1000Base-T and 10/100/1000Base-T is that the rate of 1000Base-T locks at 1000 Mbps but the 10/100/1000Base-T with the function of auto-negotiation. Auto-negotiation allows devices to perform automatic configuration to achieve the best possible mode of operation over a link so the 10/100/1000Base-T can operate on 10 Mbps, 100 Mbps, and 1000 Mbps.
3. Question: Will the speed be fast with this port versus regular rj45 port on switche?
Answer: Yes. The SFP port with this RJ45 adapter should be at least as fast as any other RJ45 port on your switch or router.
4. Question: Will this work with Cisco?
Answer: Yes, it will.
5. Question：Will this work with 1g (not 10g) sfp ports in Cisco switches?
Answer：Yes. As long as the rate of both ends are consistent.
6. Question: Are these hot swapable in Juniper switch?
Answer: Yes.
Hot Tags: 1.25g SFP 1310nm, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, SFP DWDM 120km Optical Module, 1550nm 80km SFP 1250M, SFP BIDI 20km Module in stock, 155Mbs 1550nm 120km DOM Transceiver Module, 155M CWDM SFP 160km DOM Module, 20km 1 25G BIDI Transceiver in stock
