9-dimensional WSS board
1) The schematic diagram of the internal structure of the WSS board is shown in the picture 1, and the board occupies 1/2 slot. required built-in BA and PA, built-in VOA before PA input; OCM, OTDR built-in optional.
2) The gain range of BA is 15~25dB; the gain of PA1 covers at least 15~25dB, and the gain of PA2 covers at least 22~35dB. For the performance requirements of BA and PA.
3) For power monitoring points, see the position of the PD icon in picture 2 of the internal structure diagram of the board; the output calibration value of BA is calibrated to the LINE OUT port; the input side of PA reports two input power values.
The input calibration value of the VOA is calibrated to the LINE IN port, and the input calibration value of the EDFA is the measured value at the LINE IN port minus the attenuation value of the VOA and the coupling insertion loss between the receiving side of the OSC and the main optical path. The input scaling of BA and the output scaling of PA are to be determined.
4) The board provides two indicator lights, at least three colors of red, yellow, and green. The indicator STAT is used to indicate the running status of the board, and the indicator LINE is used to indicate the status of the optical port of the corresponding port.
1 Schematic diagram of the internal structure of the 9-dimensional WSS board
2 9-dimensional WSS board panel diagram
Note: MON port identification 1/2 corresponds to BA and PA output respectively, OTDR port identification 1/2 corresponds to BA output and PA input respectively.
WSS Module Specifications
Hot Tags: 9 dimensional wss-roadm dwdm otn platform, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, Long Haul DWDM Solutions, wide wavelength optical fiber switch, 10G Redundant Multi Rate Dual Transponder, 25G DWDM Dual Fiber Network, 1RU Raman Optical Amplifier, DWDM Wave Lambda DCI White Box HT6800
