1.25g SFP Lr/Sr/Er SFP (OPTIC MODULE) 850nm

1.25g SFP Lr/Sr/Er SFP (OPTIC MODULE) 850nm
Product Introduction:
HTF' HTSF-M1G85Mx Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the VCSEL laser and the PIN photo-detector.
Social Share:
Send Inquiry
Description
Technical Parameters

SFP module multimode optic transceiver 1.25G SFP 850nm

General Description

The module data link up to 550m in 50/125um multi-mode fiber.


Model type

SFP-1.25G

Brand

HTFuture

Encapsulation

SFP

Data Rate

1250Mb/s

Wavelength

8500nm

Reach

550M

Interface

Duplex LC

LD

850nm VCSEL

Cable Type

MMF

DDM Support

Yes

Tx power

-9~-3dBm

Rx Sens

<-17dBm

Temperature

0~70°C (32~158°F)

Quality guarantee

3 years


Features

● Up to 1.25Gb/s data links

● 850nm VCSEL laser transmitter and PIN photo-detector

● Up to 550m on 50/125um MMF

● Hot-pluggable SFP footprint

● Duplex LC/UPC type pluggable optical interface

● Low power dissipation

● Metal enclosure, for lower EMI

● RoHS compliant and lead-free

● Support Digital Diagnostic Monitoring interface

● Single +3.3V power supply

● Compliant with SFF-8472

● Case operating temperature

Commercial: 0 ~ +70oC

Extended: -10 ~ +80oC

Industrial: -40 ~ +85oC


Applications

● Switch to Switch Interface

● 1xFiber channel Application

● Gigabit Ethernet

● Switched Backplane Applications

● Router/Server Interface

● Other Optical Links


Mechanical Dimensions



FAQ

1. Question: Just making sure, I can plug an LC fiber connector into these correct?

Answer: Yep, these are LC. Make sure you are using MMF, not SMF for the -SR part number.

2. Question: If i wanted to connect a brocade to a netgear using a sfp+ module, if i mixed the brocade and netgear transceivers, they should work right?

Answer: As long as both devices recognize the SFP+ modules installed, i.e. sending/receiving light, then connectivity will work between the two using Ethernet standards.

3. Question: Will this works with single mode or multi-mode or both?

Answer: 10GBase-SR is multimode, and the 850nm wavelength confirms that. The equivalent single-mode would be something like 10GBase-LR, and would have a wavelength (normally) of 1310nm.

4. Question: Does this support Netgear?

Answer: Yes, the Netgear compatible 10GBase-T module supports Netgear.


 

Hot Tags: SFP module multimode optic transceiver 1.25G SFP 850nm, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, XFP EML 1550nm ER Module, 32G SFP28 850nm 100m FC, lc single mode duplex patch cord, 10Gbps SFP BIDI 80km Optical Transceiver, 2 to 1 optical switch, 40KM CWDM SFP

Send Inquiry