SFP+ passive cable DWDM ER SFP+ optical fiber module
General Description
Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF8472.This module is designed for single mode fiber and operates at a nominal wavelength of 100GHz ITU Grid, C Band DWDM wavelength.
Model type | DWDM-SFP-10G-ER | Brand | HTFuture |
Encapsulation | SFP+ | Data Rate | 11.3Gb/s |
Wavelength | 1270-1610(nm) | Reach | 60km |
Interface | Duplex LC | LD | DWDM EML |
Cable Type | SMF | DDM Support | Yes |
Tx power | -1~3dBm | Rx Sens | <-15.8dBm |
Temperature | 0~70°C (32~158°F) | Qualityguarantee | 3 years |
Applications
● 10GBASE-ER/EW & 10G Ethernet
● SDH STM64
● Other Optical Links
Digital Diagnostic Functions
The following digital diagnostic characteristics are defined over the Recommended Operating Environment unless otherwise specified. It is compliant to SFF8472 Rev10.2 with internal calibration mode. For external calibration mode please contact our sales staff.
Parameter | Symbol | Min. | Max | Unit | Notes |
Temperature monitor absolute error | DMI_ Temp | -3 | 3 | degC | Over operating temp |
Supply voltage monitor absolute error | DMI _VCC | -0.15 | 0.15 | V | Full operating range |
RX power monitor absolute error | DMI_RX | -3 | 3 | dB | |
Bias current monitor | DMI_ bias | -10% | 10% | mA | |
TX power monitor absolute error | DMI_TX | -3 | 3 | dB |
Mechanical Dimensions
FAQ
1. Question: Is it possi le to order 400 to 500 of these?
Answer: Of course! Please contact us at "sales2@htfuture.com", we will offer you a reduced price for this bulk order. Look forward to cooperate with you.
2. Question: Is it possible to send to Brazil?
Answer: Yes, of course.
3. Question: If i wanted to connect a brocade to a netgear using a sfp+ module, if i mixed the brocade and netgear transceivers, they should work right?
Answer: As long as both devices recognize the SFP+ modules installed, i.e. sending/receiving light, then connectivity will work between the two using Ethernet standards.
4. Question: Does this support Netgear?
Answer: Yes, the Netgear compatible 10GBase-T module supports Netgear.
5. Question: What is XFP?
Answer: XFP stands for 10 Gigabit Small Form Factor Pluggable, a hot-swappable and protocol independent module. It enables a fast transmission of data in the computer network. XFP was devised by the XFP Multi-source Agreement Group and first emerged in the year 2002 along with XFI, one of its electrical components.
XFP transceiver modules are protocol-independent and fully compliant to various standards, including: 10G Ethernet, 10G Fiber Channel, SONET OC-192, SDH STM-64 and OTN G.709. It supports bit rate from 9.95G through 11.3G, along with its interface to other electrical components which is called XFI. The 10-Gigabit XFP transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit ports. XFP transceiver modules connect the electrical circuitry of the system with the optical network.
SFP package --- hot-plug small- package module, the highest rate is up to 4G, usually LC interface connect.
SFP+ package --- standard package, the working speed can be 10G, the application of 10G Ethernet.
XFP --- standardized package of serial 10G optical transceiver modules.
Hot Tags: SFP+ passive cable DWDM ER SFP+ optical fiber module, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, dac cable qsfp28, 10G OCP Redundant Dual Rate Transponder, SFP 1310nm 40km Module, single mode mpo connector, 155M SFP CWDM 40km SMF Module, 10G DWDM LC TUNABLE SFP
