Description

Send Inquiry

The SC to LC Single mode Duplex OS2 fiber patch cords reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends.

Features:

High-quality ferrules.

Strict quality testing: Insertion Loss and Return Loss 100% tested.

PVC, OFNR, OFNP and LSZH jacket upon request.

Applications

CATV & FTTH

Data Center

Surveillance System

Ethernet LAN Cabling

Fiber optic communication networks

Fiber optic equipment and instrument

Long-distance, outdoor/indoor wiring, trunking, etc

Specification

Parameter	Unit	FC,SC,LC			ST,MU,MTRJ,
		SM		MM	SM	MM
		UPC	APC	UPC	UPC	UPC
Insertion Loss	dB	≤0.2			≤0.2
Return Loss	dB	≥55	≥65	≥35	≥55	≥35
Repeatability	dB	IL≤0.2 RL≥5		IL≤0.1	IL≤0.1	IL≤0.1
Durability	dB	IL≤0.2 RL≥5		IL≤0.1	IL≤0.1	IL≤0.1
Exchangeability	dB	IL≤0.2 RL≥5		IL≤0.1	IL≤0.1	IL≤0.1
Compressive Strength	N	F>300
Operation life Span	Times	n>1000
Operation Temperature	℃	-40~75
Storage Temperature	℃	-45~85
Cable Diameter	cm	0.9,2.0,3.0 or specified

Parameter

Connectors	SC to LC
Core	Single Mode
Density	Simplex/ Duplex
Finish/Size	UPC/APC Polish
Length	Multiple Sizes Available (1m,3m,5m,10m,20m)
weight	≈30g
Wavelengths	1310 and 1550nm
Color	Yellow Jacket
Polarity	A(TX) to B(RX)

SC interface: blue large port --- its shell is rectangular, and the structural dimensions of the pin and coupling sleeve used are exactly the same as FC type. Among them, the end face of the pin is mostly grinded by PC or APC type, and the fastening method is plug-in latch type without rotation. It is equipped with metal shrapnel, which is convenient for concealed installation. This kind of connector has the advantages of low price, convenient plug-in operation, small fluctuation of insertion loss, high compressive strength and high installation density.

LC interface: blue small square port --- it is made of convenient operation modular jack (RJ) latch mechanism. The size of the pin and sleeve is small, which improves the density of the optical fiber connector in the optical fiber distribution frame. Precision ceramic sleeve ensures long-term stable mechanical and optical properties.

SC-LC single mode optical fiber jumper has the following characteristics: good interchangeability, low insertion loss, good repeatability, good tensile performance, good temperature stability, good interposition performance and large return loss. The ceramic plug-in core imported from Japan Seiko is adopted, which has long service life and continuous data exchange without packet loss.

It supports customized FC / LC / SC / ST connector, UPC / APC single mode / multimode / OM3 / OM4, 10 Gigabit and other jumpers.

From SC to LC, one end is connected with GBIC, and the other end is connected with mini-GBIC or SFP.

1. The SFP port and its corresponding 10 / 100 / 1000BASE-T Ethernet port are optoelectronic multiplexed logically. Users can choose one of them according to the actual networking situation, but they can't work at the same time. Moreover, only the optical port is in effective working state when the two ports are connected.

2. The volume of the SFP module is reduced by half than that of the GBIC module, and the number of ports can be more than double on the same panel. Other functions of the SFP module are basically consistent with GBIC. Some switch manufacturers call the SMP module miniaturized GBIC (mini-GBIC), which supports SX, LX, TX, LH, and runs 1000m.

3. XFP (10G Optical module, can be used in 10 Gigabit Ethernet, SONET and other systems, mostly using LC interface), xenpak (used in 10 Gigabit Ethernet, using SC interface).

Factory display