Other fiber counts are available such as 32, 48, 60 or even 72 fibers, but these are typically used for specialty super high-density multi-fiber arrays in large scale optical switches.
Features
MPO has many cores, high density, small volume and large capacity
Ribbon cable or bundle optical cable can be selected, and 3.0, 2.0, 0.9mm casing can be selected for branch
Length according to customer requirements
Application
Data center cabling
High density cabling communication system
QSFP isochromatic module
Communication wiring system of buildings
Through the branching device, one end is MPO / MTP connector, the other end can be LC / SC / FC and other connectors (among which LC is the most widely used). The common types are MPO / MTP (8-core) to 4 x LC branch fiber jumper, MPO / MTP (12 -core) to 6 x LC branch fiber jumper, and MPO / MTP (24-core) to 12 x LC branch fiber jumper LC branch optical fiber jumper is connected with 40g / 100g at one end and 10g at the other end through the cross type pre connected MPO / MTP technology. One 40g / 100g is decomposed into several 10g, realizing the ideal transition from high-speed port (MTP / MPO) to low-speed port (LC / SC / FC). MPO / MTP-LC optical fiber jumper can be used in many existing DC environments, such as switch, rack panel and main distribution board, because of its many cores, compact design and small size.
Product Specifications
Connector A | MPO Female (pinless) | Connector B | LC UPC Duplex |
Fiber Mode | OS2 SMF 9/125μm | Wavelength | 1310/1550nm |
MPO Connector IL | 0.35dB Max(0.15dB Typ.) | LC Connector IL | ≤0.2dB |
MPO Connector RL | ≥60dB | LC Connector RL | ≥50dB |
Attenuation at 1310nm | ≤0.32dB/km | Attenuation at 1550nm | ≤0.18dB/km |
Jacket OD | 3.0mm | Fan-Out Diameter | 2.0mm |
Installation Tensile Load | 100 N | Long-Term Tensile Load | 50 N |
Cable Jacket | LSZH | Fiber Count | 12 Fibers |
Operating Temperature | -10°C to +70°C | Storage Temperature | -40°C to +85°C |
Connector type | multi core MPO, single core connector can be LC / SC / FC / ST | MPO connector frame color | yellow (low loss), green (SM), Turquoise (MM OM3 / OM4), beige (MM) |
Type of optical cable | ribbon or bundle, 3.0, 2.0, 0.9mm casing can be selected for branch | Test wavelength | SM: 1310-1550nm, MM: 850-1300 |
Insertion loss | MPO：SM≤0.70dB，MM≤0.50dB，SM LL（SM Low Loss）≤0.35dB LC/SC/FC/ST：IL≤0.30dB | Return loss | MPO: SM / APC ≥ 50dB, mm / PC ≥ 25dB; LC / SC / FC / ST: SM / APC ≥ 60dB, SM / UPC ≥ 50dB, MM ≥ 35dB |
Repeatability | the typical change value is less than 0.20db after 500 times of plugging and plugging | Vertical tension | ≥ 120N |
End face of insert core | MPO: SM is apc8 ° and MM is PC0 ° LC / SC / FC / ST is apc8 °or UPC | End interference requirements | 100% interference or according to customer requirements |
Working temperature | - 20 ℃ to + 70 ℃ | Storage temperature | 40 ℃ to + 85 ℃ |
Optical Fiber Polarity:
A typical optical link requires two optical fibers to complete the entire transmission process. For example, the optical module includes the receiving end and the transmitting end
The receiving and transmitting ends must be ensured to be interconnected, and the matching of the sending end (TX) to the receiving end (Rx) at both ends of a fiber optic link is called polarity.
For pre-terminated, high-density cabling systems, such as MPO/MTP connections, polarity issues must be addressed.
What is the typical application of MTP-LC branch cord?
MTP-LC branch jumpers are used for port replication of blade switch board cards to facilitate the connection of these ports to other devices. Based on the specific application and what components are inserted, there are two types of branch jumpers, module branch jumpers and trunk branch jumpers.
MPO-LC breakout cable assemblies are most often used to reduce the amount of additional networking hardware within short distances. Their ability to redistribute multiple fibers from a single source to various devices allows for one cable assembly to eliminate the necessity for expensive networking equipment therefore reducing cost, setup time and complexity of fiber networks.
MPO Fiber Patch Cord are terminated with MPO connector on both end. MPO patch cord is a kind of high density cable assemblies which is generally use in three areas.
1, The Data Center application with high dense degree environment
2, The optical fiber to the building
3, The internal connector application in fiber equipment.
FAQ
Q: Can the connectors be separated on each end?
A: Yes. The connectors can be separated to allow for rolling over the connection as needed.
Q: Does HTF provide free samples?
A: It depends on the specific situation. We will try our best to satisfy you..
Q: Can I get any discount if I order large quantities?
A: Yes, of course. We'll have a discount.
Q: Does this have any outer coating protection?
A: It's indoor only.
Q: What about the lead time?
A: Samples take 1-2 days, mass production time needs 1-2 weeks.
Hot Tags: 9 and 125 MPO 12 fibers lc cable, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, MPO 6LC 9 125 Single Mode Cable, mpo female connector, XFP Transceivers, MPO Female 12 Fibers OS2, MPO Female to MPO Female, single mode mpo connector
