Features
● US Conec MTP® connector, Senko MPO Plus premium connector
● Corning® Clearcurve® multimode fiber, SMF-28® Ultra Optical Fiber
● OS2, OM3, OM4 fiber grades (OM1 and OM2 available)
● 0.35dB Elite low loss MTP/MPO connector as well standard versions of 0.6/0.75dB
● Factory terminated and tested
● Allow easy migration from 10GbE to 40GbE or 100GbE
● Pulling eyes are provided as an option to protect the fiber ends during installation
Product Specifications
Connector A | MTP Female (pinless) | Connector B | MTP Female (pinless) |
Fiber Mode | OM3 50/125μm | Wavelength | 850/1300nm |
Polish Type | UPC to UPC | Minimum Bend Radius | 7.5mm |
Insertion Loss | 0.35dB Max(0.15dB Typ.) | Return Loss | ≥20dB |
Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
Jacket OD | 3.0mm | Cable Jacket | LSZH |
Installation Tensile Load | 100 N | Long-Term Tensile Load | 50 N |
Operating Temperature | -10°C to +70°C | Storage Temperature | -40°C to +85°C |
High Performance MTP Cabling Solution
MTP optical fiber jumpers are usually used to connect optical fiber modules, MTP optical fiber wiring boxes and optical fiber adapter panels, so as to provide strong network Flexibility for data center wiring.
HTF jumpers are strictly tested before they leave the factory to ensure that the end surface is spotless, insertion loss and echo loss conform to international telecommunications standards.
Use and Application
In these 10 Gig applications, 12-fiber or 24-fiber trunk cables with MPO connectors on both end form the permanent backbone link and are then transitioned to duplex fiber connectors at patch panels via either MPO-to-LC cassettes or MPO-to-LC hybrid patch cords.
As the need for bandwidth speeds pushed beyond 10 Gig, the MPO connector became the de facto interface for higher speed switch-to-switch backbone data center applications using parallel optics. For example, 40 Gig and 100 Gig applications (40GBASE-SR4 and 100GBASE-SR4) over multimode fiber use 8 fibers with 4 transmitting at either 10 Gbps or 25 Gbps and 4 receiving at either 10 Gbps or 25 Gbps. These common data center applications require an 8- or 12-fiber MPO connector (only 8 of the 12 fibers are used when using 12-fiber MPOs). Looking ahead, standards bodies are anticipating even higher speeds of 200 and 400 Gig also being supported by MPO connectors and parallel optics. The MPO connector interface is therefore here to stay.
FAQ
Q: Does this work for 1GB?
A: Yes, at this length multimode fiber can handle speeds of 10Gbps, so you'll be fine at 1Gbps.
Q: Can I make 300 meters?
A: Yes, you can.
Q: Please advise if this cable has 8 or 4 LC connectors also let me know if you ship overseas...Thanks
A: It is 40Gbe Optic Patch Cable and the connector is MTP/MPO to 8xLC.
Q: Is this OM3 or OM4?
A: OM3.
Hot Tags: MTP 12 fibers OM3 MMF cable, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, 12 Fibers MTP LC OM4 Cable, MTP Female 12 Fibers OM3 Cable, OM3 12 Fibers MTP Cable, OM4 8 Fibers LC MTP Cable, 12 Fibers MTP OM3 Multimode Cable, MTP 24 OM4 Breakout Cable
