100Gbps QSFP28 PSM4 C-band DWDM

100Gbps QSFP28 PSM4 C-band DWDM
Details:
100Gbps QSFP28 PSM4 C-band DWDM is Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 PSM4 for 100G or 40 Ethernet Metro-Access over DWDM applications. The transceiver is a high performance module for data communication and interconnect applications. It integrates four data lanes in each direction with 104 Gbps bandwidth. Each lane can operate at 26Gbps up to 120km over G.652 SMFwith external Mux/Demux,EDFA,CD compensation.The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates HTF proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.
Send Inquiry
Description
Send Inquiry

100Gbps QSFP28 PSM4 C-band DWDM Optical Transceiver Module

 

4 channels full-duplex transceiver modules
Transmission data rate up to 26Gbps per channel
4 channels C-band EML DWDM
Compliant to ITU-T 694.1
4 channels PIN photo detector array
Internal CDR circuits on both receiver and transmitter
channels
Support CDR bypass
Low power consumption <5W
Hot Pluggable QSFP form factor
Up to 120km reach for G.652 SMF with external Mux/
Demux,EDFA ,CD compensation
Up to 10km reach for G.652 SMF without external CD compensation
Single male MPO(APC 8-degree) connector receptacle
Operating case temperature 0°C to +70°C
3.3V power supply voltage
RoHS compliant(lead free)

 

100Gbps QSFP28 PSM4 C-band DWDM Applications
100G Ethernet Metro-Access over DWDM
P to P Access Network

 

100Gbps QSFP28 PSM4 C-band DWDM is Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 PSM4 for 100G or 40 Ethernet Metro-Access over DWDM applications. The transceiver is a high performance module for data communication and interconnect applications. It integrates four data lanes in each direction with 104 Gbps bandwidth. Each lane can operate at 26Gbps up to 120km over G.652 SMFwith external Mux/Demux,EDFA,CD compensation.The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates HTF proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.

 

Parameter

Symbol

Min

Typical

Max

Unit

Notes

 

Transmitter

 

Centre Wavelength

λc

per ITU-T 694.1

nm

-

 

Side Mode Suppression Ratio

SMSR

30

-

 

dB

-

 

Average launch power, each lane

PAVG

-4.3

 

4.5

dBm

-

 

Optical Modulation Amplitude(OMA),each lane

POMA

-1.3

 

4.5

dBm

1

 

Extinction Ratio

ER

6

-

-

dB

-

 

Relative Intensity Noise

RIN

 

 

-128

dB/Hz

 

 

Optical Return Loss Tolerance

TOL

 

 

20

dB

 

 

Transmitter Reflectance

RT

 

 

-20

dB

 

 

Average launch power of OFF transmitter, each lane

POFF

 

 

-30

dBm

-

 

Eye Mask coordinates:

X1, X2, X3, Y1, Y2, Y3

{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}

Hit Ratio = 5x10-5

 

Receiver

Centre Wavelength

λc

1200

 

1600

nm

-

 

Damage Threshold, each lane

THd

5.5

 

 

dBm

2

 

Average Receive Power, each lane

 

-10.6

 

4.5

dBm

 

 

Receive power, each lane (OMA)

 

 

 

4.5

dBm

 

 

Receiver Reflectance

RR

 

 

-26

dBm

 

 

Receiver Sensitivity (OMA), each lane

SEN

 

 

-8.6

dBm

3

 

LOS Assert

LOSA

 

-18

 

dBm

-

 

LOS De-Assert – OMA

LOSD

 

-15

 

dBm

-

 

LOS Hysteresis

LOSH

0.5

 

 

dB

-

 

 

Hot Tags: 100gbps qsfp28 psm4 c-band dwdm, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, 100G 4X25G QSFP28 ER, 100Gbps PAM4 DWDM QSFP28, 100Gbps QSFP28 PSM4 C Band DWDM, 100G QSFP28 CWDM4 2KM, 100g transceiver lc, 100G QSFP28 1310nm DDM LC 40KM

Send Inquiry