Features
QSFP28 MSA compliant
Hot pluggable 38 pin electrical interface
4 LAN-WDM lanes MUX/DEMUX design
4x25G electrical interface
Maximum power consumption 6.5W
LC duplex connector
Supports 103.125Gb/s aggregate bit rate
Up to 80km transmission on single mode fiber
Operating case temperature: 0℃ to 70℃
Single 3.3V power supply
ROHS 2.0 compliant
Applications
100GBASE-ZR4 100G Ethernet
Telecom networking
DESCRIPTIONS
HTF’s HTQS-HS4ZE is designed for 80km optical communication applications. This module contains 4- lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter- face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector. A block diagram is shown in Figure 1
Cautions
1) Do not look into fiber end faces without eye protection using an optical meter (such as magnifier and microscope) within 100 mm, unless you ensure that the laser output is disabled. When operating an optical meter, observe the operation requirements.
2) The RX input optical power cannot be higher than the damage threshold. You need the optical attenuator with RX in order to meet the input optical power range if necessary.
3) The HTQS-HS4ZE 100 is the customized module, it can only interconnect with the HTQS-HS4ZE module. CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Hot Tags: 80KM 100GBASE-ZR4 QSFP28 Optical Transceiver Module, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, 100G pluggable transceivers, 100G QSFP28 Single Fiber 20km Module, 100G ER QSFP28 Transceiver, 100G QSFP28 BIDI LR1 10KM, qsfp28 module, 100g psm4 qsfp28 optical transceiver
