fiber channel transceiver 2.5G BIDI 80km 1550Tx/1310nmRx Module
Model type | SFP-2.5G-BIDI-80KM | Brand | HTF |
Encapsulation | SFP | Data Rate | 2.5G |
Wavelength | 1550nm-TX/1310nm-RX 1310nm-TX/1550nm-RX | Reach | 80KM |
Cable Type | SMF（9/125µm） | Interface | BIDI LC optical connector |
Protocols | SFF-8472 MSA compliant &SFF-8431;MSA Compliant | Features | Hot-pluggable SFP footprint； Low power dissipation； Metal enclosure, for lower EMI； RoHS compliant and lead-free； Support Digital Diagnostic Monitoring interface； Single +3.3V power supply |
Commercial Temperature Range | Commercial: 0~+70oC Extended: -10~+80oC Industrial: -40~+85oC | ||
Optical Components | 1550nm DFB laser transmitter and PIN photo-detector |
HTF’HTSF-B2G5531Zx Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the APD photo-detector .The module data link up to 80km in 9/125um single mode fiber.
FAQ
Q：Can you use a QSFP to 4xSFP+ DAC cable at just 10G with only one of the SFP+ ends?
A：Not exactly sure what you’re trying to get at here, but the easy rule-of-thumb here is that the transceivers at each of a fiber link need to be fundamentally the same.
Even if you’re using a four-lane transmitter at one end, the receiver at the other needs to not only also be four-lane, but in the same band, and with a matching decoder to the encoder at the TX end.
Pretty much any mismatch will prevent the link from operating.
Hot Tags: fiber channel transceiver 2.5G BIDI 80km 1550Tx/1310nmRx Module, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, 2 5G 80km SFP BIDI Optical HTSF B2G5531Zx, 1 25G 40KM BIDI SFP, DWDM 2 5G 160km Module, BIDI155M 15501490 ZR LC in stock, CWDM 80km 155M SFP Module, 155M DWDM 100GHz SFP 80km
