fiber transceiver lc SFP module Tunable DWDM XFP ZR Module
Part Number Ordering Information
Part Number | Data Rate (Gb/s) | Wavelength (nm) | Transmission Distance(m) | Temperature (oC) (Operating Case) |
HTXF-DT96-80C | 10.3125 | Refer to wavelength selection | 80km SMF | 0~70 commercial |
Recommended Operating Conditions and Power Supply Requirements
Parameter | Symbol | Min | Typical | Max | Unit | Notes |
Operating Case Temperature | TOP | 0 | 70 | oC | commercial | |
Supply Voltage | VCC | 3.135 | 3.465 | V | ||
Main Supply Voltage | Vcc5 | 4.75 | 5.25 | V | ||
Data Rate | 10.3125 | Gb/s | ||||
Control Input Voltage High | 2 | Vcc | V | |||
Control Input Voltage Low | 0 | 0.8 | V | |||
Link Distance (SMF) | D | 80 | km | 9/125um |
Optical Characteristics
The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
Parameter | Symbol | Min. | Typical | Max | Unit | Notes |
Transmitter | ||||||
Optical Wavelength | λc | λc -0.05 | λc +0.05 | nm | 1 | |
Center Wavelength Spacing | 50 | GHz | ||||
Optical Spectral Width | ∆λ | 1 | nm | |||
Side Mode Suppression Ratio | SMSR | 30 | dB | |||
Average Optical Power | PAVG | -1 | 4 | dBm | 2 | |
Optical Extinction Ratio | ER | 9 | dB | |||
Transmitter and Dispersion Penalty | TDP | 3 | dB | |||
Transmitter OFF Output Power | POff | -30 | dBm | |||
Frequency stability (BOL) | -1.5 | 1.5 | GHz | |||
Frequency stability (EOL) | -2.5 | 2.5 | GHz | |||
Transmitter Eye Mask | Compliant with IEEE802.3ae | |||||
Receiver | ||||||
Center Wavelength | λC | 1270 | 1610 | nm | ||
Receiver Sensitivity (Average Power) | Sen. | -24 | dBm | 3 | ||
Input Saturation Power (overload) | Psat | -7 | dBm | |||
LOS Assert | LOSA | -37 | dB | |||
LOS De-assert | LOSD | -27 | dBm | |||
LOS Hysteresis | LOSH | 0.5 | dBm | |||
Mechanical Dimensions
FAQ
1、Question：Should I use CAT6a or SFP+ to connect my office to my server room?
Answer：
SFP+ is just a small form factor transceiver module for network gear so you can get SFP+ transceiver for copper (cat6a) or fiber optic. The cost of labor can sometimes make it worth the upgrade to fiber optic cable and the transceivers are fairly inexpensive. Fiber isn't affected by environmental issues like copper, so you can string it near electromagnetic gear like fluorescent light ballasts, transformers, etc. Fiber optic also does not pass electricity so the damage that a lightning strike can cause is isolated to just that side.
If money isn't an issue then I would look at using OM3 cabling and SFP-10G-SR modules on each side. That gets you 10Gbps speeds for up to 300 meters.
2.Question：What is your minimum order?
Answer：To achieve customers' satisfaction, we accept sample order, even one piece.
Hot Tags: fiber transceiver lc SFP module Tunable DWDM XFP ZR Module, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, 10G Tunable DWDM XFP Transceivers, 10G XFP BIDI LR, Tunable DWDM XFP ZR Module, hot swap DWDM Tunable optics, China Tunable XFP DWDM 80km C Band, 10G BIDI XFP 40km Transceiver
