Features
Up to 11.3Gb/s data links
DWDM EML transmitter and APD receiver
100 GHz ITU channel spacing with integrated wavelength locker
Up to 80km on 9/125µm SMF
Hot-pluggable SFP+ footprint
Duplex LC/UPC type pluggable optical interface
Metal enclosure, for lower EMI
RoHS compliant and lead-free
Support Digital Diagnostic Monitoring interface
Single +3.3V power supply
Maximum power consumption 1.5W
Compliant with SFF+MSA and SFF8472
Case operating temperature
Commercial: 0 ~ +70 oC
Extended: -10 ~ +80 oC
Applications
10GBASE-ZR/ZW & 10G Ethernet
SDH STM64
Other Optical Links
Part Number Ordering Information
|
Part Number |
Data Rate (Gb/s) |
Wavelength (nm) |
Transmission Distance(km) |
Temperature (oC) (Operating Case) |
|
HTSX-1Dxx96ZC |
10.3125 |
Refer to wavelength selection |
80km SMF |
0~70 commercial |
|
HTSX-1Dxx96ZE |
10.3125 |
Refer to wavelength selection |
80km SMF |
-10~80 extended |
|
HTSX-1Dxx96ZI |
10.3125 |
Refer to wavelength selection |
80km SMF |
-40~85 Industrial |
Optical Characteristics
The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
|
Parameter |
Symbol |
Min. |
Typical |
Max |
Unit |
Notes |
|
Transmitter |
||||||
|
Optical Wavelength |
λc |
λc -0.1 |
λc +0.1 |
nm |
1 |
|
|
Center Wavelength Spacing |
100 |
GHz |
||||
|
Optical Spectral Width |
∆λ |
1 |
nm |
|||
|
Side Mode Suppression Ratio |
SMSR |
30 |
dB |
|||
|
Average Optical Power |
PAVG |
-1 |
4 |
dBm |
2 |
|
|
Optical Extinction Ratio |
ER |
8.2 |
dB |
|||
|
Transmitter and Dispersion Penalty |
TDP |
3 |
dB |
|||
|
Transmitter OFF Output Power |
POff |
-30 |
dBm |
|||
|
Transmitter Eye Mask |
Compliant with IEEE802.3ae |
|||||
|
Receiver |
||||||
|
Center Wavelength |
λC |
1270 |
1610 |
nm |
||
|
Receiver Sensitivity (Average Power) |
Sen. |
-23 |
dBm |
3 |
||
|
Input Saturation Power (overload) |
Psat |
-6 |
dBm |
|||
|
LOS Assert |
LOSA |
-32 |
dB |
|||
|
LOS De-assert |
LOSD |
-26 |
dBm |
|||
|
LOS Hysteresis |
LOSH |
0.5 |
dBm |
|||
Notes:
1. λc refer to wavelength selection, and corresponds to approximately 0.8 nm
2. Class 1 Laser Safety per FDA/CDRH and IEC-825-1 regulations.
3. Measured with Light source 1528.77~1563.86nm, ER=6.0dB; BER =<10^-12 @10.3125Gbps, PRBS=2^31-1 NRZ.
What are the specific applications of the 10G SFP+ DWDM ZR Optical Transceiver Module?
The 10G SFP+ DWDM ZR optical transceiver module has specific applications in the following aspects:
Metropolitan Area Networks (MANs): In MANs, there is a need for high-speed and long-distance data transmission between different network nodes. The 10G SFP+ DWDM ZR module can support transmission distances of up to 80km over single-mode fiber, and it can use the DWDM technology to multiplex multiple 10G signals onto a single fiber. This helps to maximize fiber utilization, realize high-capacity data transmission between core nodes, aggregation nodes, and access nodes in the city, and meet the communication needs of various users and services in the city.
Data Center Interconnect (DCI): As data centers continue to expand and the demand for data exchange between data centers increases, the 10G SFP+ DWDM ZR module provides a cost-effective solution for DCI. It can transmit data over long distances at a speed of 10Gbps, connecting data centers located in different areas, enabling efficient data sharing, backup, and disaster recovery between data centers.
Telecom Backhaul Networks: In the telecom network, the 10G SFP+ DWDM ZR module is used for backhaul connections between base stations and central offices. It can transmit the large amount of data generated by base stations to the central office for processing and aggregation, and support the smooth operation of mobile communication services such as 4G and 5G. Its long-distance transmission capability and DWDM multiplexing function can reduce the cost of fiber laying and improve the efficiency of network construction.
Ethernet Networks: The module is applicable to 10GBASE-ZR/ZW and 10G Ethernet networks. It can be used in enterprise local area networks (LANs) to realize high-speed data transmission between different departments or buildings, or in wide area networks (WANs) to connect different branches or offices of enterprises, improving the communication efficiency and data transfer speed of the enterprise network.
SDH/SONET Networks: The 10G SFP+ DWDM ZR module can also be applied to SDH (Synchronous Digital Hierarchy) and SONET (Synchronous Optical Network) networks. It can support the transmission of STM-64 signals in SDH networks, realizing the integration and transmission of traditional telecom services and IP data services, and providing a reliable communication foundation for the evolution and upgrading of telecom networks.
Fiber Channel Networks: In storage area networks (SANs) based on Fiber Channel technology, the 10G SFP+ DWDM ZR module can be used for long-distance data transmission. It can meet the requirements of high-speed, reliable data transmission in SANs, enabling efficient data storage, management, and sharing between servers and storage devices.
Hot Tags: 10g sfp+ dwdm zr optical transceiver module, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, 10Gb s XFP 1550nm 80km, 200G CONHERENT DWDM CFP2 TO QSFP28 CARD, 100G QSFP28 4SFP28 DAC, fast fiber single mode 1x4 optical switch, 32GFC SFP28 1310nm 10km, 32G SFP28 850nm 100m FC
