Description
HTF optical compensation function with slope dispersion compensation for standard single-mode fiber can DCM (G.652) were dispersion and dispersion slope compensation broad band in the C-band, allowing the system to optimize residual dispersion. In the dispersion compensation value of 1545nm wavelength dispersion can reach -2070ps / nm.
Features
DWDM system dispersion compensation and broadband low residual dispersion
G.652 fiber C-band 100% slope compensation (standard value)
Low insertion loss
Low polarization mode dispersion
Performance indicators by Telcordia GR-2854-CORE standard certification
Reliability by Telcordia GR-1221-CORE standard certification
Paramaters
|
Parameter |
Min. |
Max. |
|
Brillouin Scattering Threshold (dBm) |
6 |
- |
|
Non-linear Coefficient (n2/Aeff) (W-1) |
- |
1.4*10-9 |
|
Effective Area (Aeff)@1550nm (um2) |
20 |
- |
|
Maximum Input Power (dBm) |
|
23 |
|
Operating Temperature Range |
-5℃ |
70℃ |
|
Storage Temperature Range |
-40℃ |
85℃ |
|
Relative Humidity |
<85% |
|
|
Environmental / Reliability Testing |
Comply with Telcordia GR-2854 and GR-1221 standard |
|
|
Size (mm) |
442 mm(W)×249 mm(D)×44 mm(H) |
|
Ordering Information
|
Parameter |
1UL-DCM-20 |
1UL-DCM-40 |
1UL-DCM-60 |
1UL-DCM-80 |
1UL-DCM-100 |
1UL-DCM-120 |
|
Compensated Distance (km) |
20 |
40 |
60 |
80 |
100 |
120 |
|
1545nm Dispersion (ps/nm) |
-340+/-10 |
-670+/-20 |
-1000+/-30 |
-1340+/-40 |
-1680+/-50 |
-2010+/-60 |
|
1545nm Relative Dispersion Slope (nm-1) |
0.0036 +/- 10% |
|||||
|
Insertion Loss (dB) |
≤3.3 |
≤4.7 |
≤6.4 |
≤8.0 |
≤9.5 |
≤11.0 |
|
Insertion Loss (typ) (dB) |
2.7 |
4.0 |
5.4 |
6.7 |
8.0 |
9.3 |
|
Polarization Mode Dispersion (ps) |
≤0.6 |
≤0.7 |
≤0.8 |
≤0.9 |
≤1.0 |
≤1.1 |
|
Polarization Mode Dispersion (typ) (ps) |
0.2 |
0.3 |
0.4 |
0.5 |
0.6 |
0.7 |
|
Polarization Dependent Loss (dB) |
≤0.1 |
≤0.1 |
≤0.1 |
≤0.1 |
≤0.1 |
≤0.1 |
Ultra-large Capacity Intelligent Transmission Platform
Specifications
|
Name |
Description |
|
|
Transmission Capacity |
96x10Gbps /96x100Gbps |
|
|
Network Management Unit |
EMS network management disk |
|
|
OTU |
Support 1.25G ~10Gbps,100Gbps 1/2/4/8 /10Gbps Fibre Channel CPRI: 2/3/4/5/6/7 1G/10G Ethernet LAN or WAN PHY STM-4/16/64 SONET/SDH |
|
|
MUX/DEMUX |
Support 8ch/16ch/40ch/48ch |
|
|
EDFA |
EDFA erbium doped fiber amplifier |
|
|
DCM |
DCM:G.652/G655 Dispersion compensation fiber module |
|
|
OLP |
OLP optical protection |
|
|
Size |
Services Card |
191 ( W ) x 253 ( D ) x 20 ( H ) mm |
|
1U 4-slot Chassis |
482.5 ( W ) x 350( D ) x 44.5 ( H ) mm |
|
|
2U 8-slot Chassis |
482.5 ( W ) x 350( D ) x 89 ( H ) mm |
|
|
5U 20-slot Chassis |
482.5 ( W ) x 350( D ) x 222.5 ( H ) mm |
|
|
Environment |
Operating Temperature |
-10℃ ~ 60℃ |
|
Storage Temperature |
-40℃ ~ 80℃ |
|
|
Relative Humidity |
5% ~ 95% Non-condensing |
|
|
Power Supply Mode |
Dual power supply, AC220V/DC-48V optional |
|
|
Power Consumption |
1U <120W, 2U<200W, 5U<400W |
|
HT6000 Serial Introduction
The HT6000 is a compact, high-capacity, low-cost OTN optical transmission system which introduced by HTF. It adopts CWDM / DWDM common platform design, supports multi-service transparent transmission, and has flexible networking and access capabilities. Applicable to the national backbone network, provincial backbone network, metro backbone network and other core networks, to meet the needs of large-capacity nodes above 1.6T, is the industry's most cost-effective transmission application platform. Build a large-capacity WDM transmission expansion solution for IDC and ISP operators.
