Notes for use of compact optical module
(1) When take the optical module, do not touch the metal connection part of the compact optical module, so as not to damage the optical module.
(2) When insert compact optical module, confirm the compact optical module is attached to the handle of the compact optical module electro-optical port and then insert.
(3) If just out of the compact optical module, do not unplug the light mouth dust plug, directly inserted.
(4) When pull out the compact optical module, first pull out the fiber line, pull the handle to the position of about 90 degrees and slowly pull out, pull out when pulling out cannot be too hard or pull out the handle is not in place, may cause damage to the compact optical module shield.
SFP+ DAC high-speed cable use note
(1) When insert SFP+ DAC high-speed cable, you need to push the SFP+ cable module along the horizontal direction gently into the slot, until close contact with the slot.
(2) When take out the SFP+ DAC high-speed cable, pull the pull ring outward along the horizontal direction to make the cable module unlock, and pull out the cable, at the same time with the hand against the SFP+ module iron shell.
(3) Do not excessive bend, twist the cable in the process of insertion, otherwise it will cause permanent damage.
(4) Do not let the fiber tail is right on your eyes. Do not look into the fiber. Do not see the fiber tail directly or use instruments, laser is not visible, but may cause permanent damage to the human eyes.
