Bending radius
The raw material of optical fiber is glass, which is more fragile than copper wire. It also needs more attention and protection in operation and management. The reliability and performance of optical fiber are closely related to its bending radius. If the optical fiber is excessively bent, the optical signal transmitted inside the optical fiber will easily refract and spill out of the optical fiber cladding, resulting in the reduction of the optical signal strength. The loss caused by the bending of optical fiber is called bending loss.
Path of fiber patch cord
The path of the optical fiber jumper is closely related to the bending radius, which has a profound impact on the performance and maintenance of the jumper. Therefore, the path of each optical fiber jumper should be clearly defined. If the fiber jumper is not routed properly, it may lead to overcrowding of the terminal panel and increase the risk of excessive bending radius.
Accessibility of optical fiber patch cord
If you can easily find the installed fiber patch cord, the maintenance of the fiber patch cord will become much faster, and it will also provide the correct bending radius protection. In the process of network reconfiguration, accessibility plays an important role, which directly affects the reliability and cost of network reconfiguration.
Entity protection
The optical fiber jumpers routed between various devices can affect the reliability of the network to a large extent. If the optical fiber jumpers are not properly protected, the technical workers and equipment will easily damage the optical fiber jumpers. Therefore, it is very important to protect the installed optical fiber jumper physically
