1. Brand optical fiber core
Poor fiber core bending usually leads to signal loss and transmission interruption. Brand optical fiber can greatly improve bending performance, minimize signal loss, and achieve faster and more efficient fiber routing and installation.
2. MTP / MPO connector in line with industry standard
MTP / MPO fiber connector can pack 12, 24 or 72 fibers into one fiber to increase fiber density, so it is popular in data centers with limited space. The industry recognized MTP / MPO connector can ensure the polarity of MTP / MPO wire and reduce insertion loss and return loss. The MTP / MPO connector in line with the industry standard has strong structure and durability, and can be recycled for hundreds of times. The interface between the connector and the optical fiber jumper is round, so the optical fiber jumper can be wired from any direction of the MTP / MPO connector port, which simplifies the wiring structure.
3. Insertion loss
Insert loss refers to the loss of effective optical power of a link caused by the insertion of a connector or plug. It is one of the key factors that affect the performance of optical fiber network. The smaller the insertion loss, the better the network performance.
4. Flame retardant grade
The shell of MTP / MPO optical fiber jumper can be made of different materials. These materials have different fire resistance, which can be divided into polyester, PVC, LSZH, etc., and most of them have good flame retardant performance.
5. Optical fiber jumper test
The end face of MTP / MPO jumper connector is divided into four areas: core area, cladding area, rubber edge area and plug-in surface. It requires scratches and flaws in each area of the connection. The cleaner the end face, the better the quality of the cable. If the size is not strictly controlled, the network can not run reliably for a long time. 3D detection defines the parameters of MTP / MPO fiber jumper connector. If the connector size of MTP / MPO wire cannot meet the requirements, the system connection failure will occur. Therefore, it is very important to select MTP / MPO optical fiber jumper which is tested by 3D interferometer.
