Various types of MPO jumpers can be produced after processing MPO connector and optical fiber cable. MPO jumpers can be designed with 2-12 cores, up to 24 cores. Currently, 12 core MPO connectors are widely used. The compact design of MPO connector makes the number of MPO jumper cores small. MPO jumper is widely used in FTTx, 40 / 100gsfp, SFP + and other transceiver modules or equipment internal and external connection applications in the wiring process which requires high-density integrated optical fiber line environment.
Classification
MPO optical fiber jumper can be divided into transition type and non transition type. There are various types of MPO jumper, including ribbon MPO jumper and bundle MPO jumper. The Po jumper fan out by branches (circular or square) can generally transfer out 2-24 core 0.9 or 2.0 optical cable branches. The connector type is specified by the customer. FC, LC, SC, ST and other types can be selected. The total length or branch length of MPO jumper and other requirements can be selected It's up to the customer to choose. All kinds of MPO jumper products in the form of MPO optical fiber jumper, MPO transfer jumper, MTP type, MTP 10 Gigabit jumper, multi-mode 10 Gigabit jumper, MPO with branching jumper and other forms of MPO jumper products meet the requirements of telcordia-gr-326, IEC standards and ROHS.
Features and advantages
● US Conec MTP® connector, Senko MPO Plus premium connector
● Corning® Clearcurve® multimode fiber, SMF-28® Ultra Optical Fiber
● OS2, OM3, OM4 fiber grades (OM1 and OM2 available)
● 0.35dB Elite low loss MTP/MPO connector as well standard versions of 0.6/0.75dB
● Factory terminated and tested
● Allow easy migration from 10GbE to 40GbE or 100GbE
● Pulling eyes are provided as an option to protect the fiber ends during installation
● It can eliminate termination error and save installation time
● Each cable shall be 100% tested for low insertion loss and back reflection
● Superior performance excellent MTP and high-end discrete connector
● Multi mode OM3, OM4, single mode G652D, g657a2 and other fiber specifications can be selected according to different configuration requirements of users
● Comply with iec-61754-7 and tia-604-5 (focis-5) standards
Connector Type A | MPO/MTP | Connector Type B | FC, LC, SC, ST (customizable) |
Fiber Mode | Multimode/Single mode | Wavelength Range | 1250~1650nm 850nm/1300nm |
MPO Connector IL | 0.35dB Max(0.15dB Typ.) | LC Connector IL | ≤0.2dB |
MPO Connector RL | ≥20dB | LC Connector RL | ≥20dB |
Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
Jacket OD | 3.0mm | Fan-Out Diameter | 2.0mm/0.9mm |
Installation Tensile Load | 100 N | Long-Term Tensile Load | 50 N |
Cable Jacket | LSZH/PVC/OFNR/OFNP | Fiber Count | Customizable |
Operating Temperature | -10°C to +70°C | Storage Temperature | -40°C to +85°C |
Application
1. LAN wiring between different buildings of enterprises
2. Optical link interconnection in optical active equipment
3. Wiring in communication base station and distribution box
4. Optical signal connection in the computer room of residential area, industrial park and commercial building
5. Building dense cabling system
6. Optical fiber communication system, cable TV network, telecommunication network 5. Building dense wiring system
7. LAN, Wan, FTTx
What is the polarity of MPO products?
This matching between the sender (TX) and the receiver (Rx) at both ends of the fiber link is called polarity.
There are four kinds of polarity of MPO products
The arrangement position of fiber cores at both ends of type a MPO jumper is the same, corresponding one by one. One end positioning key is upward and one end locating key is downward.
If the fiber cores at both ends of B-type MPO jumper are arranged in opposite positions, the fiber core 1 at the jumping end corresponds to position 12 at the other end. Both ends of the positioning key direction is the same.
The positions of a pair of adjacent cores of C-type MPO jumpers are crossed, one end of the core 1 is on the other end of the core 2. One end of the positioning key is up and the other end of the positioning key is downward.
The principle of MPO connection is as follows: it must be connected with the same number of connectors (12 cores connected with 12 cores, 24 cores connected with 24 cores, etc.); one male and one female head are a pair of connections; the connection must be of the same polishing type (PC and PC, APC and APC).
The polarity of MPO connector is managed by key. Two kinds of keys are defined: key up and key down. A pair of MPO connectors are matched by an MPO adapter. There are two types of MPO adapters: Class A is defined as key up / key down, and class B is defined as key up / key up. Fiber polarity can be managed by selecting a Class A or class B adapter.
MPO fiber jumper is one of the optical fiber jumpers. Its main advantages are low insertion loss, high return loss, good inter insertion and high durability.
HTF's optical fiber patchcords are customized, the quality is guaranteed, and the accessories are imported.
Contact: support@htfuture.com
Skype :sales5_ 1909，WeChat ：16635025029
