What are the classification and grinding methods of fiber jumper?

May 19, 2020

Leave a message


Classification:

① LC type fiber patch cord: the connector connecting the SFP module, which is made of the modular jack (RJ) latch mechanism with convenient operation. (commonly used in routers)

② SC type optical fiber jumper: the connector connecting the GBIC optical module, its shell is rectangular, and the fastening method is plug pin latch type, without rotation. (most used on router switches)

③ St type optical fiber jumper: commonly used in optical fiber distribution frame, the shell is round, and the fastening method is screw buckle. (for 10base-f connections, the connector is usually st type. Commonly used in fiber distribution frame)

④ FC type optical fiber jumper: the external reinforcement method is metal sleeve, and the fastening method is screw buckle. Generally used on ODF side (most used on distribution frame)

⑤ MPO optical fiber jumper: MPO optical fiber jumper is composed of two high-precision plastic connectors and optical cables. It is miniaturized design, high density, stable and reliable connection.

⑥ MTP optical fiber jumper: MTP refers to multi-core terminal push in connector. MTP jumper has many cores and small volume. The most commonly used ones are 12 core and 24 core. It can be used in the environment of high density integrated optical fiber line.


Grinding method:

After "/", it indicates the fiber connector cross-section process, i.e. grinding method.

"PC" is the most widely used equipment in telecom operators, and its joint section is flat.

"PC" refers to fiber connector cross-section process, and PC is the most common.

There is also a kind of "UPC" process, its attenuation is smaller than that of PC, and the flange of equipment with special requirements is generally FC / UPC. FC / UPC is used for internal fiber jumping of ODF frame by foreign manufacturers to improve the index of ODF equipment


Send Inquiry