Name: EPON 1GE ONU Support Customized Web Logo
Brand: HTF
SKU: 151020933

Description

Send Inquiry

Specification

Technical item	1GE EPON ONU
Chipset	ZTE
PON interface	1 EPON port (PX20+) Wavelength:Tx1310nm,Rx 1490nm SC/UPC connector Receiving saturation:≥-8dBm Receiving sensitivity: ≤-30dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface	1*10/100/1000M Full/Half, RJ45 connector
Operating condition	Temperature: -30℃～+70℃ Humidity: 10%～90%（non-condensing）
Storing condition	Temperature : -30℃～+70℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/0.5A
Power consumption	≤4W
Dimension	110mm(L) x100mm(W) x23mm (H)
Net weight	0.2

Software Parameters

Technical item
Basic	Support Bridge and Routing DHCP/PPPOE/Static IP Support Static route Support NATSupport MPCP discover&ister Support authentication Mac/Loid/Mac+Loid Support Triple Churning Support DBA bandwidth Support auto-detecting, auto-configuration, and auto firmware upgrade Support authentication SN/Psw/Loid/Loid+Psw
Alarm	Support Dying Gasp Support Port Loop Detect Support Eth Port Los
LAN	Support Port rate limiting Support Loop detection Support Flow control Support Storm control
VLAN	Support VLAN tag mode Support VLAN transparent mode Support VLAN trunk mode(max 8 vlans) Support VLAN 1:1 translation mode(max 8 vlans) Auto VLAN detection
Multicast	Support IGMPv1/v2 Support IGMP Snooping Max Multicast vlan 8 Max Multicast Group 64
QoS	Support 4 queues Support SP and WRR Support 802.1P
Management	Support CTC OAM 2.0 and 2.1 Support ITUT984.x OMCI Support WEB Support TELNET Support CLI
Throughput	Upstream >900Mbps Downstream >960Mbps

Product interface and LED definitions

Indicator			Description
1	PWR	Power status	On: The ONT is power on; Off: The ONT is Power off;
2	PON	ONU Register	On: Success to register to OLT; Blinking: In process of registering to OLT; Off: In process of registering to OLT;
3	LOS	EPON optical signals	Blinking: Optical power lower than receiver sensitivity ; Off: Optical in normal
4	LAN	LAN port status	On: Ethernet connection is normal; Blinking: Data is being transmitted through the Ethernet port; Off: Ethernet connection is not set up;