After the introduction, I believe you have also found that the optoelectronic module is different from the ordinary optical module in that the optoelectronic module connects two network devices (such as switch, server, network distribution frame, etc.) through the network cable. This article will take the gigabit optoelectronic module and the 10 gigabit optoelectronic module as an example for you to explain in detail how to use the optoelectronic module.
1. Operation of the optoelectronic module
Take the light converter module out of the box and adjust the direction of the light module (gripper and label facing up, gold finger facing down).
Then insert the light converter module gently into the optical slot of the switch until it is blocked. Pay attention to whether the indicator light is on. If it is on, it indicates that the light conversion module has been started.
Finally, plug the network cable into the port of the optoelectronic module and connect the other end to the network distribution rack or server.
Friendly tip: before using the optoelectronic module, do a good job of antistatic preparation, such as wear antistatic bracelet.
2. The usage scheme of gigabit optoelectronic module
The most common use of gigabit modules is between two servers, where a network distribution frame is required for cross connections.
3. The use scheme of ten thousand megabit optoelectronic module
In data center wiring, the 10 gigabit optoelectronic module is often used between the switch and the server to realize the 10 gigabit transmission network.
Hot questions and answers about the optoelectronic module
1、Q: what is the maximum transmission distance of the gigabit optoelectronic module? What is the maximum transmission distance of the 10,000 megabit optoelectronic module?
A: the gigabit optoelectronic module is generally connected with Cat6 network cable, and its maximum transmission distance is 100m; The 10 gigabit optoelectronic module is generally connected to the Cat6a network cable, and its maximum transmission distance is 30m.
2、Q: what should I pay attention to when choosing the optoelectronic module?
A: first, the compatibility of the optoelectronic module; Second, the transmission rate and distance of the optoelectronic module; Third, the operating temperature of the optoelectronic module, the general commercial temperature is 0~70℃, industrial temperature is -45~80℃; Fourth, the service life of the optoelectronic module; In addition, the brand of the module is also very important, which is related to the after-sales service, so we must choose a regular manufacturer.
Through the detailed introduction of the gigabit optoelectronic conversion module and the ten thousand optoelectronic conversion module in this paper, I believe you should clearly understand the optoelectronic conversion module and how to use the optoelectronic conversion module. HTF can provide you with a variety of high-quality optoelectronic modules, such as 100 megabit optoelectronic module, gigabit optoelectronic module, 10 megabit optoelectronic module and adaptive optoelectronic module. In addition, we can also provide customized OEM products according to your special needs.
