MPO/MTP fiber distribution frame (box) is a fiber line environment which needs high density integration such as MDF, IDF cabling area fiber backbone connection and distribution unit management in large data center room, and realizes FTTX and 40/100g SFP and other light-emitting modules. Installed in 19 inch rack and cabinet, mpo/mtp pre terminated module box or front panel of mpo/mtp adapter can be configured.
Product application:
MPO/MTP fiber is specifically used in the optical communication system of dense cabling system between buildings, optical link interconnection in LAN optical active equipment, optical fiber wiring in communication base station, industrial park room, commercial building room, cable television network, telecommunication network LAN, Wan, FTTX optical signal connection.
Product features:
1. Standard 1U (2U, 3U) 19 inch rack type, suitable for assembling various standard cabinets.
2. Optical fiber inlet: several.
Branch end LC adapter outlet: duplex, quadruple flexible optional.
3. The mpo-1U optical fiber distribution frame (box) can be installed with 4 MPO or MTP pre termination boxes. The pre termination box is equipped with duplex LC adapter, and the maximum number of transmission fiber cores is 96.
4. MPO-2U fiber distribution frame (box) can be installed with 8 MPO or MTP pre termination boxes. The pre termination box can be installed with duplex LC adapter, and the maximum number of transmission fiber cores is 192.
5. MPO-3U fiber distribution frame (box) can be installed with 12 MPO or MTP pre termination boxes. The pre termination box is equipped with duplex LC adapter, and the maximum number of transmission fiber cores is 288.
6. MPO / MTP optical fiber distribution frame (box) is made of new high-quality cold-rolled steel plate. After strict production process, the plate is electrostatic sprayed, which conforms to the international communication standard.
7. MPO/MTP-LC module box adopts imported lock and strip adapter panel.
8. The panel and fiber core have clear line sequence identification, which is convenient for transfer, jump and test.
9. The pull-out structure can be pulled out freely, which is easy to operate and has good sealing performance for dust prevention.
Technical parameter
Fiber type | Single mode, 10 Gigabit multimode |
Insertion loss | MPO: typical value ≤ 0.50db, maximum value ≤ 0.70db; branch end connector: typical value ≤ 0.20db, maximum value ≤ 0.30db |
Return loss | APC≥60dB UPC≥50dB |
Number of times of plug and pull | MPO: 500 times; branch end connector: 1000 times |
Tensile strength | ≥ 120N (except for 0.9mm optical cable) |
Working temperature | -20℃-----+70℃ |
Bending radius of optical fiber | ≥40mm |
MPO / MTP high density optical fiber pre termination module box (component) -- optical fiber products in the era of cloud computing big data
Product application:
MPO/MTP-LC pre terminated module box is mainly used to branch the 12 core MPO connector of the trunk optical cable terminal into a dual core conventional connector. The specific feature is that the front end of the module box is LC adapter (flange) port, generally 12 duplex or 6 quadruple adapters are used, and two MPO or MTP adapters are installed on the back. In the module box, the front panel LC duplex adapter (flange) is directly connected with the back MPO or MTP adapter to form a whole. Each independent MPO/MTP-LC pre terminated module box is placed in the optical fiber distribution frame to form a complete MPO/MTP-LC optical fiber distribution frame (box).
Product features:
1. The branch of 12 core MPO / MTP connector is converted to LC duplex connector;
2. Low loss connection, easy to give full play to the maximum transmission performance of optical fiber;
3. The front panel is equipped with LC adapter, and the rear panel is equipped with MPO / MTP adapter;
4. The box body design is scientific, using high-quality engineering plastics and aluminum alloy materials, covered with electrostatic spraying, beautiful and simple appearance, easy to use;
5. All ports are labeled at the front end, which is easy to identify and search.
MPO adapter, including key up key down, key up key up
Low insertion loss
Support 4 ~ 72 core single mode, multi-mode MPO fiber line connection
Comply with IEC 61757-7 international standard
Data center array multi-channel connection system and high-density multi-channel connection system
40g, 100g optical transmission system, qsfp, CXP module
MPO-LC / SC pre terminated sector fiber refers to the use of MPO single head 12 core or 24 core connector at one end and LC / SC connector at the other end. The product is mainly used in the pre termination module box to connect the jumper between the pre terminated backbone optical cable and the equipment, so as to make it modular and achieve plug and play. Compared with the traditional welding, it greatly improves the convenience and efficiency of work.
One MPO connector with a guide pin is connected with the trunk optical cable through the MPO port of the module box, and the LC or SC connector at the other end is connected to the jumper at the equipment end through the LC panel or SC panel of the module box.
The customized jumper length can match with the module box, which is convenient for fiber winding.
There are two main types of MPO backbone fiber optic cable: 1. Mpo-mpo trunk optical cable; 2. Mpo-lc / SC / FC fan-shaped branch backbone cable; 2;
MPO-MPO backbone cable
numbering rules of MPO trunk optical cable (each space represents one digit)
Each MPO pre terminated fiber optic cable contains 12 core optical fibers, which can be connected with 12 core optical fibers at one time;
the circular double-layer reinforced sheath structure is adopted for the optical cable, which overcomes the problem of bending sensitivity and has higher strength, which is convenient for construction layout.
sheath and pull ring are used to facilitate construction and provide protection for plug during wiring;
Currently, it can provide pre terminated products of 62.5/125 μm (OM1) standard multimode fiber, 50 / 125 μm laser optimized 10 Gigabit (OM3) multimode fiber, and low water peak single-mode fiber.
The end face of MPO plug has male and female structure, which can be selected according to the actual situation.
If you need anything, you can contact HTF Zoey.
contact：support@htfuture.com
Skype：sales5_ 1909，WeChat：16635025029
