We have always emphasized that proper end face cleaning of fiber optic connectors is important to ensure the performance of the entire fiber optic system, and it is necessary to clean the fiber optic connectors before each use. But optical module ports do not need to be cleaned frequently unless there is a problem, because they are less likely to be contaminated than jumper cables. In general, if you clean the connector but still encounter low power output of the optical module or device failure signals, clean the port of the optical module. But the pollution of optical module port will also lead to network failure. However, many people ignore the importance of optical module cleaning or do not clean it in an appropriate way. That's why I want to talk about it today.
How do you clean it?
The best way to clean the optical module port is to use an air precipitator to remove small dust particle. In addition, you can also use a lint-free cotton swab to clean. Detailed cleaning steps are as follows:
1. Remove the dust cover from the optical module.
2. Use an air precipitator to remove any dust or particles.
3. Insert the appropriate size (2.5mm or 1.25mm) of lint-free cotton swabs and rotate clockwise. Be careful not to use alcohol cleaning sticks.
4. Repeat steps 2 and 3 if necessary.
5. Remove the lint-free cotton swab, and then re-insert the dust cover into the optical module. When not in use, always keep the dust cover inserted into the optical module.
6. Place the optical module in a clean area free from static electricity, such as anti-static mat.
Optical module ports also need to be properly cleaned to ensure fiber transmission performance. An error is recommended in the port connection of the optical module.
When cleaning optical module port. An air filter and a lint-free cleaner are recommended for cleaning. In addition, cross contamination should be avoided and clean jumpers should always be used.
The optical module is a necessary tool for optical signal transmission, and the polluted optical module may affect its transmission performance, thus causing link failure. Therefore, it is necessary to clean the optical module regularly. HTF is a professional optical device supplier. Our optical module and optical fiber jumper products are of high quality and affordable, which have attracted extensive attention and praise from industry users.
