Characteristic:
Plug and play, simple loading and unloading, low insertion loss, high return loss, strong anti-interference ability, good repeatability and interchangeability
category
LC fiber patch cord can be divided into single-mode fiber and multi-mode fiber patch cord according to different types of fiber. The single-mode fiber jumper is generally yellow for long-distance transmission, and the multi-mode fiber jumper is generally water blue, green or orange for short-distance transmission.
It can be divided into simplex fiber patch cord and duplex fiber patch cord according to different connector types.
According to different grinding methods, it can be divided into UPC fiber jumper and APC fiber jumper. The end face of UPC small square fiber patch cord has a certain arc, while the end face of APC small square fiber patch cord is a slope with an angle of 8 degrees.
application
LC optical fiber patch cord can be connected with the optical module of SFP, the optical module of SFP + and the optical module of XFP. It can be used in the optical communication system, the optical access network, the Optical CATV (Radio Television), the telecommunication network, the local area network (LAN), the man and other network environments, and also can be used in the photoelectric test equipment, the optical fiber test equipment and the optical fiber distribution frame.
Product recommendation
LC / UPC-LC / UPC duplex single mode OS2 fiber jumper, 0.12db low insertion loss, insensitive bending, PVC (ofNR), 9 / 125 μ m, 1310 / 1550nm, 10 mm
LC / UPC-LC / UPC duplex multimode OM4 fiber jumper, 0.15dB low insertion loss, insensitive bending, PVC (ofNR), 50 / 125 μ m, 850 / 1300nm, 7.5mm
LC / UPC-LC / UPC 10 Gigabit duplex multimode OM3 fiber jumper, one tube, two cores, insensitive to bending, PVC (ofNR), 50 / 125 μ m (OM3), 850 / 1300nm, 7.5mm
