MPO Fiber Patch cable/trunk cable is terminated with MPO connector on both ends. MPO Patch cable/trunk cables connect MPO modules together as a permanent link. The Patch cable/trunk cables are available with 12, 24, 48, 60, 72 ,96,144 fibers. Support speeds up to 10/40/100Gbps data center solutions. They are typically adopted to interconnect cassettes, panels or ruggedized MPO fan-outs, and to facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environments. Besides, MPO also provides much flexibility and convenience once you have to change the connector style in the patch panels. Instead of changing the connector on the cable trunk, just installing a new cassette with the new connector style on the cross-connect side of the patch panel.
Product Features
● Reduced Insertion Loss by up to 50%
● High Durability
● High Temperature Stability
● Good Exchangeability
● US Conec MTP® connector, Senko MPO Plus premium connector，4,8,12 and 24 fiber connector
terminations and assemblies
● Corning® Clear curve® multimode fiber, SMF-28® Ultra Optical Fiber
● OS2, OM3, OM4 fiber grades (OM1 and OM2 available)
● 0.35dB Elite low loss MTP/MPO connector as，high return loss
● Well standard versions of 0.6/0.75dB
● Factory terminated and tested，economical solution for mass-termination of fiber
● Allow easy migration from 10GbE to 40GbE or 100GbE
● Pulling eyes are provided as an option to protect the fiber ends during installation
● Ruggedized round cable, oval cable and bare ribbon options available
● Color coded housings available to differentiate fiber type, polish type and/or connector grade
● Good in repeatability and exchangeability
Specifications
Parameters | Unit | Values |
Fiber Mode | - | OM4 (OM3) 50/125μm |
Polish Type | - | UPC to UPC |
Inserstion Loss | dB | 0.35dB Max (0.15dB Typ.) |
Attenuation at 850nm | dB/km | ≤2.3 |
Jacket OD | mm | 3.0 |
Installation Tensile Load | N | 100 |
Operating Temperature | °C | -10 ~ +70 |
Wavelength | nm | 850/1300 |
Minimum Bend Radius | mm | 7.5 |
Return Loss | dB | ≥20 |
Attenuation at 1300nm | dB/km | ≤0.6 |
Cable Jacket | - | LSZH |
Long-Term Tensile Load | N | 50 |
Storage Temperature | ℃ | -40 ~ +85 |
Spec items. | Single mode (APC 8-degree polished) | Multimode (PC Flat polish) |
Insertion loss (MPO) (IEC 61300-3-34) | Standard loss：≤0.75dB(max), ≤0.35dB(Typical) Super Low loss：≤0.35dB(max), ≤0.20dB(Typical) | Standard loss：≤0.6dB(max), ≤0.35(Typical) Super Low loss：≤0.35dB(max) , ≤0.20dB(Typical) |
Return loss(MPO) | ≥60dB（8degree polishing） | ≥25dB |
Durability | <0.3dBtypical change, 200 matings | |
Interchangeability | ≤0.2dB | |
Tensile strength | >70N | |
MPO Connector Types
Length Tolerance
Overall Length(L)(m) | length of tolerance(cm) |
0<L<1 | +5/-0 |
1<L<10 | +10/-0 |
10<L<40 | +15/-0 |
40<L | +0.5% x L/-0 |
Pre-terminated MPO Technology-Polarity
Optical Fiber Polarity:
A typical optical link requires two optical fibers to complete the entire transmission process. For example, the optical module includes the receiving end and the transmitting end
The receiving and transmitting ends must be ensured to be interconnected, and the matching of the sending end (TX) to the receiving end (Rx) at both ends of a fiber optic link is called polarity.
For pre-terminated, high-density cabling systems, such as MPO/MTP connections, polarity issues must be addressed.
Fiber Optic Patch Cables
Fiber Optical Patch cord is the base product of the network cabling system. It is made up of fiber optical cable and both end with fiber optical connectors.
FAQ:
Q: Can HTF provide fiber jumper in different colors?
A: Yes, we can.
Q: How is your Quality Control?
A: We have QC during production and before packing. We have been working to supply qualified products, high quality service to partners.
Q: Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: Are you trading company or manufacturer?
A: We are factory. We have own sales department and after-sales service team.
Q: What is the difference between MTP and MPO?
A: MTP is the USConec brand name MPO that we use. The terms are interchangeable.
Hot Tags: MPO 12 fibers MMF cable, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, mpo 12 connector type, mpo trunk cable, MPO Female to MPO Female connector, om3 fiber patch cable, MPO 12 Fibers OM4 Cable, MPO to MPO connectors
