SFP mode 10g single mode 10Gbs SFP+ BIDI 10KM
General Description
Model type | BIDI-SFP-10G-LR | Brand | HTFuture |
Encapsulation | SFP+ | Data Rate | 11.1Gb/s |
Wavelength | TX1270nm/RX1330nm TX1330nm/RX1270nm | Reach | 10km |
Interface | BIDI LC | LD | DFB |
Cable Type | SMF | DDM Support | Yes |
Tx power | -6~-1dBm | Rx Sens | <-14.4dBm |
Temperature | 0~70°C (32~158°F) | Quality guarantee | 3 years |
Absolute Maximum Ratings
It has to be noted that the operation in excess of any individual absolute maximum ratings might cause permanent damage to this module.
Parameter | Symbol | Min | Max | Unit | Notes |
Storage Temperature | TS | -40 | 85 | oC | |
Power Supply Voltage | VCC | -0.5 | 3.6 | V | |
Relative Humidity (non-condensation) | RH | 5 | 95 | % | |
Damage Threshold | THd | 5 | dBm |
Features
● Up to 11.1Gb/s data rate
● 1270nm DFB laser and PIN receiver for HTSX-B273396Lx
● 1330nm DFB laser and PIN receiver for HTSX-B332796Lx
● Up to 10km transmission on SMF
● BIDI LC optical connector
● Single +3.3V power supply
● Metal enclosure, for lower EMI
Digital Diagnostic Functions
The following digital diagnostic characteristics are defined over the Recommended Operating Environment unless otherwise specified. It is compliant to SFF8472 Rev10.2 with internal calibration mode. For external calibration mode please contact our sales staff.
Parameter | Symbol | Min. | Max | Unit | Notes |
Temperature monitor absolute error | DMI_ Temp | -3 | 3 | degC | Over operating temp |
Supply voltage monitor absolute error | DMI _VCC | -0.15 | 0.15 | V | Full operating range |
RX power monitor absolute error | DMI_RX | -3 | 3 | dB | |
Bias current monitor | DMI_ bias | -10% | 10% | mA | |
TX power monitor absolute error | DMI_TX | -3 | 3 | dB |
Mechanical Dimensions
FAQ
1.Question: Should I use CAT6a or SFP+ to connect my office to my server room?
Answer: SFP+ is just a small form factor transceiver module for network gear so you can get SFP+ transceiver for copper (cat6a) or fiber optic. The cost of labor can sometimes make it worth the upgrade to fiber optic cable and the transceivers are fairly inexpensive. Fiber isn't affected by environmental issues like copper, so you can string it near electromagnetic gear like fluorescent light ballasts, transformers, etc. Fiber optic also does not pass electricity so the damage that a lightning strike can cause is isolated to just that side.
If money isn't an issue then I would look at using OM3 cabling and SFP-10G-SR modules on each side. That gets you 10Gbps speeds for up to 300 meters.
2.Question: What are SFP-based Gigabit Ethernet ports, and what are they used for?
A small (small pluggable) small transceiver plugged into the SFP port of a network switch and connected to Fiber Channel and Gigabit Ethernet (GbE) fiber optic cable at the other end. In addition to the GBIC transceiver, the SFP module is called "mini-GBIC" due to its small size. By selecting the appropriate SFP module, the same electrical port on the switch can be connected to different types (multimode or single-mode) and different wavelengths of fiber. If the fiber is upgraded, replace the SFP module.
Hot Tags: SFP mode 10g single mode 10Gbs SFP+ BIDI 10KM, China, manufacturers, suppliers, factory, customized, buy, price, bulk, compatible brand, Double Fiber CWDM 10km SFP Optical Transceiver, 10GBASE DWDM SFP C band 100Ghz 80km Transceiver, ER CWDM SFP , 10Gbs SFP BIDI 10KM, 10G SFP 10km LR BIDI, 10Gbs DWDM 80km Multi Rate SFP Transceiver
